WEE Technology Co.,Ltd. » Bridge Rectifiers WEET » WEET Flat Bridge Rectifiers 1000V 6A 10A 50A GBJ1010 GBU1010 GBU610 GBJ5010 Single Phase Bridge

WEET Flat Bridge Rectifiers 1000V 6A 10A 50A GBJ1010 GBU1010 GBU610 GBJ5010 Single Phase Bridge

WEE Technology Company Limited
We are WEE, We Enhance Efficiency
Manufacturer of Diode Rectifier, Bridge Rectifier, Transistor

WEET Flat Bridge Rectifiers 1000V 6A 10A 50A GBJ1010 GBU1010 GBU610 GBJ5010 Single Phase Silicon Bridge

There are four types of bridge rectifier packages: square bridge, flat bridge, round bridge, and patch MINI bridge.

Square Bridge Rectifiers main packages: BR3, BR6, BR8, GBPC, KBPC, KBPC-W, GBPC-W, MT-35 (three-phase bridge).
Flat Bridge Rectifiers main packages: KBP, KBL, KBU, KBJ, GBU, GBJ, D3K.
Round Bridge Rectifiers main packages: WOB, WOM, RB-1.
SMD MINI Bridge Rectifiers main packages: BDS, MBS, MBF, ABS.

Connect the positive poles of two diode rectifiers (set this junction point as A) to form a series branch, and connect the negative poles of the other two diode rectifiers (set this junction point as B) to form another series branch, and then connect the above two branches in parallel (set the two branches and the connection points are respectively C and D), and the formed circuit is a square bridge rectifier. Also called a single-phase bridge rectifier circuit. AC power is input from C and D terminals, DC power Output from A (positive) and B (negative) terminals.

The Bridge Rectifier is made up of four rectifier silicon chips for bridge connection, and externally packaged with insulating plastic. The high-power bridge rectifier is encapsulated by zinc metal shell outside the insulating layer to enhance heat dissipation. There are many varieties of bridge rectifiers: flat, round, square, bench-shaped (in-line and patch), etc. The maximum rectified current ranges from 0.5A to 100A, and the maximum reverse peak voltage ranges from 50V to 1600V.

The Bridge Rectifier is generally used in full-wave rectifier circuits, and it is divided into full bridge and half bridge.

The half bridge is to seal the half of the two diode bridge rectifiers together. Two half bridges can form a bridge rectifier circuit, and a half bridge can also form a full wave rectifier circuit with a center tap of a transformer. The full bridge is composed of 4 diode rectifiers connected in the form of a bridge full-wave rectifier circuit and packaged as a whole.

The forward current of the full bridge has various specifications such as 0.5A, 1A, 1.5A, 2A, 2.5A, 3A, 5A, 10A, 20A, 35A, 50A, etc. The withstand voltage (the highest reverse voltage) is 25V, 50V, 100V, 200V, 300V, 400V, 500V, 600V, 800V, 1000V and other specifications.

1000V Single Phase Silicon Flat Bridge Rectifiers 6A GBU610, 10A GBJ1010 GBU1010, 50A GBJ5010 are used the most widely.
Consult us more information: https://weetcl.com/Single_Phase_Bridge_Rectifiers/   

more product support: https://weetcl.com/Products/ 
Skype, Email: info@weediode.com
Written by WEE Technology Company Limited