We are WEE, We Enhance Efficiency
WEET 1.0 AMPS. MB1S THRU MB10S Glass Passivated Bridge Rectifiers
MB1S(50V),MB2S(100V),MB3S(200V),MB4S(400V),MB6S(600V),MB8S(800V),MB10S(1000V)
The
function of MB10S bridge rectifier is to work through the diode's
unidirectional conduction principle. In general, the diode is
forward-conducting and reverse-cut, that is, the diode only allows its
positive pole to be positive and negative pole to be negative. The diode
only allows the current to pass in one direction, so when it is
connected to the AC circuit, it can make the current in the circuit flow
only in one direction, so-called "rectification", with two tubes being
half-pumped rectification, and four tubes being full-flow rectification.
Convert
AC power to DC power, including half-wave rectification, full-wave
rectification, and bridge rectification. The bridge rectifier
encapsulates the four diodes of the bridge rectification and draws only
four pins. Of the four pins, two DC outputs are labeled + or -, and the
two AC inputs have a ~ mark. Apply the rectifier bridge to the circuit,
mainly considering its maximum operating current and maximum reverse
voltage.
Check more MB1S, MB2S, MB3S, MB4S, MB6S,MB8S,MB10S information at https://www.weetcl.com/Single_Phase_Bridge_Rectifiers/WEE_MBS_MB1S_THRU_MB10S.html
datasheet: https://www.weetcl.com/pdf/WEET_MBS_MB1S_THRU_MB10S.pdf
Skype, Email: info@weediode.com
Written by WEE Technology Company Limited
