WEE Technology Co.,Ltd. » Bridge Rectifiers WEET » WEET 1.0 AMPS. MB1S THRU MB10S Glass Passivated Bridge Rectifiers

WEET 1.0 AMPS. MB1S THRU MB10S Glass Passivated Bridge Rectifiers

We are WEE, We Enhance Efficiency


WEET 1.0 AMPS. MB1S THRU MB10S Glass Passivated Bridge Rectifiers
MB1S(50V),MB2S(100V),MB3S(200V),MB4S(400V),MB6S(600V),MB8S(800V),MB10S(1000V)

The function of MB10S bridge rectifier is to work through the diode's unidirectional conduction principle. In general, the diode is forward-conducting and reverse-cut, that is, the diode only allows its positive pole to be positive and negative pole to be negative. The diode only allows the current to pass in one direction, so when it is connected to the AC circuit, it can make the current in the circuit flow only in one direction, so-called "rectification", with two tubes being half-pumped rectification, and four tubes being full-flow rectification.

Convert AC power to DC power, including half-wave rectification, full-wave rectification, and bridge rectification. The bridge rectifier encapsulates the four diodes of the bridge rectification and draws only four pins. Of the four pins, two DC outputs are labeled + or -, and the two AC inputs have a ~ mark. Apply the rectifier bridge to the circuit, mainly considering its maximum operating current and maximum reverse voltage.

Check more MB1S, MB2S, MB3S, MB4S, MB6S,MB8S,MB10S information at https://www.weetcl.com/Single_Phase_Bridge_Rectifiers/WEE_MBS_MB1S_THRU_MB10S.html 
datasheet:
https://www.weetcl.com/pdf/WEET_MBS_MB1S_THRU_MB10S.pdf


Skype, Email: info@weediode.com
Written by WEE Technology Company Limited

0 Comments