WEET Square Bridge Rectifiers 50A 1000V BR5010 Silicon Bridge Through Hole BR50005 BR5002-BR5008

WEE Technology Company Limited
We are WEE, We Enhance Efficiency
Manufacturer of Diode Rectifier, Bridge Rectifier, Transistor


WEET Square Bridge Rectifiers 50A 1000V BR5010 Silicon Bridge Through Hole BR50005 BR5001 BR5002 BR5004 BR5006 BR5008

Our company adheres to the principle of honesty, all the products sold are in our own inventory, brand new original, real shots, all descriptions are true descriptions, and there is no shoddy.

The model BR5010, weight 955g, application range is motor, the rectifier element is a single-phase bridge, the power characteristic is medium power, the frequency characteristic is low frequency, AC input voltage is 380V, DC output voltage is 1000V, and DC output current is 50A, the forward peak voltage is 1000V, the reverse repetitive peak voltage is 1000V, the reverse repetitive peak current is 150mA, the insulation voltage is 3V, and the operating junction temperature is 115 ℃, the efficiency is 99%.

BR50005 BR5001 BR5002 BR5004 BR5006 BR5008 BR5010 Application Honda, Huandai, Huizhong, Hummer, Infiniti, Jaguar, Jeep...

The same seire Square Bridge Rectifiers 35A Silicon Bridge Through Hole 50V BR35005, 100V BR3501, 200V BR3502, 400V BR3504, 600V BR3506, 800V BR3508, 1000V BR3510.

WEE Technology Company Limited is a marketing office established in Hong Kong since 2000. We are specialized in manufacturing diodes and bridge rectifiers, both in surface mount and through hole Type, which including Zener Diodes,Switching Diodes,Bridge Rectifiers,General Rectifier Diodes,Fast Recovery Rectifiers,High Efficient Rectifiers,Schottey Barrier Rectifiers,Transient Voltage Suppessors,Super Fast Recovery Rectifiers,Small Signal Transistors.

WEE Jiangsu factory was set up in 2001, which specializing in diodes and rectifiers products, mainly including SMAF, SMA-J, SMA, SMB, SMC, DO-15, DO-27, DO-41, A-1, R-6 package and so on. WEE Anhui factory is the expertise in bridge rectifiers since 1998. Bridge rectifiers current range from 0.5A to 50A, voltage range from 50V to 1000V, most common package are MINIDIP, DB,WOM,MBS, MBF, KBP, GBP, GBL, S25VB, TO-220, KBL, KBU, GBU, GBJ, KBPC, GBPC and so on.All of our products are meeting RoHS 2.0 and Reach standard.

Current Export Market: North America, South America, Western Europe, Eastern Europe, Eastern Asia, Southeast Asia, Mid East, Africa..

Number of Employees: 401 - 500 People

more product support: https://weetcl.com/Products/ 
Skype, Email: info@weediode.com
Written by WEE Technology Company Limited

Read More

WEET Square Bridge Rectifier 35A 1000V BR3510 Single Phase Bridge Through Hole BR35005-BR3508

WEE Technology Company Limited
We are WEE, We Enhance Efficiency
Manufacturer of Diode Rectifier, Bridge Rectifier, Transistor

WEET Square Silicon Bridge Rectifiers 35A 1000V BR3510 Single Phase Bridge Through Hole BR35005 BR3501 BR3502 BR3504 BR3506 BR3508

FEATURES:
Surge overload:240~500 amperes peak
Low forward voltage drop
Mounting position: Any
Electrically  isolated  base:2000 Volts
Solderable 0.25" FASTON terminals
Materials used carries U/L recognition

BR10/15/25/35/50A W -G SERIES"-G" : RoHS Device

REVERSE VOLTAGE-50 to 1000V
FORWARD CURRENT-10/15/25/35/50A

MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating at 25°C ambient temperature unless otherwise specified.
Resistive or inductive load 60HZ.
For capacitive load current by 20%

The same seire Square Bridge Rectifiers:

10A Silicon Bridge Through Hole 50V BR10005,  100V BR1001, 200V BR1002, 400V BR1004, 600V BR1006, 800V BR1008
15A Silicon Bridge Through Hole 50V BR15005,  100V BR1501, 200V BR1502, 400V BR1504, 600V BR1506, 800V BR1508
25A Silicon Bridge Through Hole 50V BR25005,  100V BR2501, 200V BR2502, 400V BR2504, 600V BR2506, 800V BR2508
50A Silicon Bridge Through Hole 50V BR50005,  100V BR5001, 200V BR5002, 400V BR5004, 600V BR5006, 800V BR5008

Contact us to get Pricing, Inventory, Delivery & Lifecycle Information.

more product support: https://weetcl.com/Products/ 
Skype, Email: info@weediode.com
Written by WEE Technology Company Limited

Read More

WEET Single Phase Square Bridge Rectifiers 1000V 50A KBPC5010 BR5010 35A GBPC3510 BR3510

WEE Technology Company Limited
We are WEE, We Enhance Efficiency
Manufacturer of Diode Rectifier, Bridge Rectifier, Transistor


WEET mainly deals in Bridge Rectifiers and Diode Rectifiers. The company adheres to the business philosophy of "customer first, forge ahead" , to provide customers with superior services. Welcome to patronize! The strong product is Large Size Single Phase Bridge Rectifiers, TVS Transient Voltage Suppressors. We always insist on honesty and benefit to customers, and insist on using our sincere services to impress customers. If you are interested in our products, you can directly submit purchasing information through email. Welcome friends from all industries to guide and negotiate business.

Popular Single Phase Bridge Rectifiers Products List:

50.0 AMPS GBPC50005 THRU GBPC5010 (GBPC50005, GBPC5001, GBPC5002, GBPC5004, GBPC5006, GBPC5008, GBPC5010) Bridge Rectifiers GBPC GBPC50005 THRU GBPC5010
35.0 AMPS GBPC35005W THUR GBPC3510W (GBPC35005W, GBPC3501W, GBPC3502W, GBPC3504W, GBPC3506W, GBPC3508W, GBPC3510W) Bridge Rectifiers GBPC GBPC35005W THUR GBPC3510W
15.0 AMPS GBPC15005 THRU GBPC1510 ( GBPC15005, GBPC1501, GBPC1502, GBPC1504, GBPC1506, GBPC1508, GBPC1510 ) Bridge Rectifiers GBPC GBPC15005 THRU GBPC1510

35.0 AMPS KBPC35005 THUR KBPC3510(KBPC35005W, KBPC3501W, KBPC3502W, KBPC3504W, KBPC3506W, KBPC3508W, KBPC3510W) Bridge Rectifiers KBPC KBPC35005 THUR KBPC3510
10.0 AMPS KBPC10005 THUR KBPC1010K ( KBPC10005, KBPC1001, KBPC1002, KBPC1004, KBPC1006, KBPC1008, KBPC1010 ) Bridge Rectifiers KBPC KBPC10005 THUR KBPC1010K

25.0 AMPS GBJ25005 THUR GBJ2510 (GBJ25005, GBJ2501, GBJ2502, GBJ2504, GBJ2506, GBJ2508, GBJ2510) Glass Passivated Bridge Rectifiers GBJ GBJ25005 THUR GBJ2510
15.0 AMPS GBJ15005 THUR GBJ1510 (GBJ15005, GBJ1501, GBJ1502, GBJ1504, GBJ1506, GBJ1508, GBJ1510) Glass Passivated Bridge Rectifiers GBJ GBJ15005 THUR GBJ1510
6.0 AMPS GBJ601 THRU GBJ610 (GBJ6005, GBJ601, GBJ602, GBJ604, GBJ606, GBJ608, GBJ610) Glass Passivated Bridge Rectifiers GBJ GBJ601 THRU GBJ610

10.0 AMPS KBJ10005 THUR KBJ1010 (KBJ10005, KBJ1001, KBJ1002, KBJ1004, KBJ1006, KBJ1008, KBJ1010) Glass Passivated Bridge Rectifiers KBJ KBJ10005 THUR KBJ1010
6.0 AMPS KBJ6005 THRU KBJ610 (KBJ6005, KBJ601, KBJ602, KBJ604, KBJ606, KBJ608, KBJ610) Glass Passivated Bridge Rectifiers KBJ KBJ6005 THRU KBJ610

15.0 AMPS GBU15005 THRU GBU1510(GBU15005, GBU1501, GBU1502, GBU1504, GBU1506, GBU1508, GBU1510) Bridge Rectifiers


more product support: https://weetcl.com/Products/ 
Skype, Email: info@weediode.com
Written by WEE Technology Company Limited

Read More

WEET Flat Bridge Rectifiers GBJ 10A 1000V GBJ1010 Single Phase Bridge Through Hole GBJ10005-GBJ1008

WEE Technology Company Limited
We are WEE, We Enhance Efficiency
Manufacturer of Diode Rectifier, Bridge Rectifier, Transistor

Generally speaking, we call the components directly plugged into the circuit board as Dip components. The corresponding components are SMD components. There are some internal bridge rectifiers with large power and capacity that require additional heat sinks and special installation places. Therefore, the Dip bridge rectifier refers to the bridge rectifier that is directly plugged into the circuit board. Generally, the power is not very large. Most of the common ones are <20A, and a heat sink can be added to the circuit board.

Common classifications of bridge rectifiers are generally directly classified by their withstand voltage and allowable current.

Bridge rectifiers are generally used in circuits that require AC (pulse) to DC conversion. Most electrical appliances are used. They are generally used in switching power supplies or power circuits of electrical appliance, low-power switching power supplies, chargers, power adapters, LED light rectifiers, electric fans, TV sets, indoor air conditioners and other related electrical products.

WEET adheres to the quality policy of "Keep improving, satisfying customers, pursuing excellence, and innovative development", with the goal of serving customers, continuous innovation, pursuit of excellence, and continuous improvement of product quality. Products are widely used in industries such as lighting, power adapters, computers, televisions, communication equipment, tablets, and small household appliances.

WEET provides customers with cost-effective products with excellent quality and cost competitiveness, and is committed to becoming one of the best manufacturers of semiconductor components.

WEET Flat Bridge Rectifiers GBJ 10A 1000V GBJ1010 Through Hole Single Phase Bridge
Same serie includes GBJ10005(50V) GBJ1001(100V) GBJ1002(200V) GBJ1004(400V) GBJ1006(600V) GBJ1008(800V)

more product support: https://weetcl.com/Products/ 
Skype, Email: info@weediode.com
Written by WEE Technology Company Limited

Read More

WEET Flat Bridge Rectifiers GBU 10A 1000V GBU1010 Single Phase Bridge Through Hole GBU10005 GBU1001

WEE Technology Company Limited
We are WEE, We Enhance Efficiency
Manufacturer of Diode Rectifier, Bridge Rectifier, Transistor

WEET is a high-tech enterprise specializing in R&D, production and sales of semiconductor discrete devices. The company has introduced a full set of foreign advanced equipments and scientific management system, and its product quality enjoys a good reputation in domestic and overseas markets. WEET has passed the ISO9001:2015 quality management system, and all products comply with environmental protection ROHS, REACH, and halogen-free standards.

WEET product models are complete: General Purpose Rectifiers, High Efficiency Rectifiers, Ultra-Fast Recovery Rectifiers, Fast Recovery Rectifiers, Single Phase Bridge Rectifiers, Transient Voltage Suppressors, Schottey Barrier Rectifiers, High Speed Switching Diodes, Silicon Planar Zener Diodes, Small Signal Transistors etc. Package forms are: SOD-123, SOD-323, SOD-523, SMAF, SMBF, SMA, SMB, SMC, SOT-23, SOT-323, SOT-523, TO-220AB, DO-41, DO-15, DO-27, R-6, MBS, MBF, ABS, ABF, DBS, KBP, GBP, KBU, GBJ, GBU, KBL etc.

Products are widely used in mobile phone chargers, switching power supplies, LED lighting drive power supplies, smart meters, smart water meters, smart appliances, smart sockets, instrumentation, small home appliance control panels, 5G consumer electronics, etc.

GBU1010 GBU bridge rectifier is a rectifier device composed of two or four diodes.

The bridge stack has three types of half bridge,full bridge, and three-phase bridge, and there are two types of positive half bridge and negative half bridge.
The full bridge consists of four diodes with four lead-out pins.

The connection point of the cathodes of the two diodes is the "positive" of the full-bridge DC output terminal, and the connection point of the anodes of the two diodes is the "cathode" of the full-bridge DC output.

The half bridge is composed of two diodes with three lead-out pins.
The pins on both sides of the positive half-bridge are the anodes of the two diodes, that is, the AC input terminal; the middle pins are the cathodes of the two diodes, that is, the "positive" of the DC output terminal.
The negative poles of the two diodes on the pins on both sides of the negative half bridge are the AC input terminals; the middle pin is the anode of the two diodes, that is, the "negative" of the DC output terminal.

A positive half bridge and a negative half bridge can form a full bridge.

Example: WEET Flat Bridge Rectifiers GBU 10A 1000V GBU1010 Single Phase Bridge Through Hole GBU10005 GBU1001 GBU1002 GBU1004 GBU1006 GBU1008

more product support: https://weetcl.com/Products/ 
Skype, Email: info@weediode.com
Written by WEE Technology Company Limited

Read More

WEET Tells How to Measure the Quality of the Bridge Rectifier

WEE Technology Company Limited
We are WEE, We Enhance Efficiency
Manufacturer of Diode Rectifier, Bridge Rectifier, Transistor

WEET Tells How to Measure the Quality of the Bridge Rectifier

Take three-phase rectifier bridge as an example. With a digital meter, it is normal if there is a voltage drop of about 700mV during forward measurement. If the voltage drop is small, it will be broken down, and if the voltage drop is too large, it will be blown. No pressure drop is normal. Multimeters are also called multiplex meters, multimeters, three-meters, multi-meters, etc. They are indispensable measuring instruments in power electronics and other sectors. They generally measure voltage, current, and resistance as their main purpose.

The three-phase bridge rectifier is composed of 6 diodes in series and parallel, and each diode can be measured separately according to the method of measuring a single diode.

According to the display mode, multimeters are divided into pointer multimeters and digital multimeters. It is a multi-function, multi-range measuring instrument. Generally, a multimeter can measure DC current, DC voltage, AC current, AC voltage, resistance and audio level, etc. Some can also measure AC current, capacitance, inductance and semiconductor parameters (such as β), etc.

WEET Flat Bridge Rectifiers GBU 6A 1000V GBU610 Single Phase Bridge Through Hole GBU6005 GBU601 GBU602 GBU604 GBU606 GBU608

The bridge rectifier stack GBU6005-GBU610 is used in small current products: low-power switching power supplies, power adapters, LED light rectifiers, electric fans, televisions, indoor air conditioners, household appliances and other related electrical products. Our products are new, original and has good stability and reliability. Welcome to consult and sample for testing.

more product support: https://weetcl.com/Products/ 
Skype, Email: info@weediode.com
Written by WEE Technology Company Limited

Read More

WEET Measurement Method of Square, Flat, Round, Patch MINI Bridge Rectifier

WEE Technology Company Limited
We are WEE, We Enhance Efficiency
Manufacturer of Diode Rectifier, Bridge Rectifier, Transistor

Measurement method of Bridge Rectifier:

The measurement method of the rectifier bridge stack is to use a multimeter to measure.

Measurement method: when normal, the forward and reverse resistances of the two AC input terminals ("~") of the full bridge are both infinite; the forward resistance of the "+""-" input terminal is infinite, and the reverse resistance (connected with red pen) "+", black pen connected to "-" end) is about 20K. Assuming to check with a digital universal meter (diode) file, the red pen is connected to "-', the black test pen is connected to "+" is 0.8; two "~" are connected are about 0.4, the red pen is connected to "+", the black pen is connected to the other three pins It must be infinite, otherwise it is a damaged rectifier.

The rectifier full bridge is composed of four diodes with four lead-out pins: the connection point of the negative poles of the two diodes is the "positive" of the DC output end of the full bridge, and the connection point of the anodes of the two diodes is the "negative" of the DC output end of the full bridge. The half bridge is composed of two diodes with three lead-out pins.

The pins on both sides of the positive half-bridge are the anodes of the two diodes, that is, the AC input terminal; the middle pins are the cathodes of the two diodes, that is, the "positive" of the DC output terminal. The negative poles of the two diodes on the pins on both sides of the negative half bridge are the AC input terminals; the middle pin is the positive poles of the two diodes, that is, the "negative poles" of the DC output terminals.

1. The basic principle of the rectifier bridge stack: The rectifier bridge stack product is made of four rectifier silicon chips for bridge connection and externally packaged with insulating plastic. The high-power rectifier bridge is encapsulated with a zinc metal shell outside the insulating layer to enhance heat dissipation. There are many types of rectifier bridges: flat, round, square, bench-shaped (in-line and patch), etc. There are GPP and O/J structures.

The maximum rectified current ranges from 0.5A to 100A, and the maximum reverse peak voltage ranges from 50V to 1600V. The half bridge is to seal the half of the two diode bridge rectifiers together. Two half bridges can form a bridge rectifier circuit, and a half bridge can also form a full wave rectifier circuit with a center tap of the transformer.

The full bridge is composed of 4 rectifier diodes connected in the form of a bridge full-wave rectifier circuit and packaged as a whole. The forward current of the full bridge has various specifications such as 0.5A, 1A, 1.5A, 2A, 2.5A, 3A, 5A, 10A, 20A, 35A, 50A, etc. The withstand voltage (the highest reverse voltage) is 25V, 50V, 100V, 200V, 300V, 400V, 500V, 600V, 800V, 1000V and other specifications.

2. Package form There are four types of rectifier bridge packages: square bridge, flat bridge, round bridge, and patch MINI bridge. The main packages of square bridges are (BR3, BR6, BR8, GBPC, KBPC, KBPC-W, GBPC-W, MT-35 (three-phase bridge)); the main packages of flat bridges are (KBP, KBL, KBU, KBJ, GBU, GBJ, D3K); round bridges are mainly packaged (WOB, WOM, RB-1); SMD MINI bridges are mainly packaged (BDS, MBS, MBF, ABS).

The following is piture for Flat Bridge Rectifier GBJ 50A 1000V GBJ5010

more product support: https://weetcl.com/Products/ 
Skype, Email: info@weediode.com
Written by WEE Technology Company Limited

Read More

WEET Flat and Square Bridge Rectifiers 50A 1000V KBPC5010 BR5010 GBJ5010 35A 1000V GBPC3510 BR3510 1

WEE Technology Company Limited

We are WEE, We Enhance Efficiency

Manufacturer of Diode Rectifier, Bridge Rectifier, Transistor


How to measure the quality of bridge rectifier?


Use the diode gear of the digital multimeter or the 100 or 1000 gear of the pointer meter to measure the resistance between the two AC input terminals and the output positive terminal of the rectifier bridge. If it is open or short, the rectifier bridge is broken. The normal value should be 400 to 2000 ohms.?


It can also be measured that the resistance from the positive terminal to the input terminal should be infinite, otherwise it is broken. The resistance value from the negative terminal to the input terminal should also be 400 to 2000 to be considered normal.


If the positive and negative DC output voltages are not normal, you do not need to check the rectifier diodes, but check the power transformer, because it is less likely that several rectifier diodes will have the same fault at the same time.


When a certain group of rectifier circuits fails, check according to the fault detection methods described above. The diodes VD1 and VD3, VD2 and VD4 of the rectifier diodes in this circuit are connected in parallel with the DC circuit, and they will affect each other during on-circuit detection. Therefore, the diode should be disconnected from the circuit for accurate detection.


In each working cycle of the bridge stack, only two diodes are working at the same time. The unidirectional conduction function of the diodes converts the alternating current into a unidirectional direct current pulsating voltage. Anatomy of a commonly used low-power bridge stack will reveal that the full-wave bridge stack adopts a plastic package structure (most low-power bridge stacks use this package form).


The high-power rectifier bridge is enclosed by a zinc metal shell outside the insulating layer to enhance heat dissipation. There are many types of rectifier bridges: flat, round, square, bench-shaped (in-line and patch), etc. There are GPP and O/J structures. The maximum rectified current ranges from 0.5A to 100A, and the maximum reverse peak voltage ranges from 50V to 1600V.


Popular Flat Bridge Rectifiers

50A 1000V: GBJ5010

10A 1000V: GBU1010 GBJ1010

6A 1000V: GBU610


Popular Square Bridge Rectifiers:

50A 1000V: KBPC5010 BR5010

35A 1000V: GBPC3510 BR3510


more product support: https://weetcl.com/Products/

Skype, Email: info@weediode.com
Written by WEE Technology Company Limited

Read More

WEET Flat and Square Bridge Rectifiers 6A 10A 35A 50A 1000V KBPC5010 BR5010 GBPC3510 BR3510 GBU1010

WEE Technology Company Limited
We are WEE, We Enhance Efficiency
Manufacturer of Diode Rectifier, Bridge Rectifier, Transistor

How to test the bridge rectifier in a simple way?


Commonly used bridge rectifier detection methods

1, Static Test
(1) Test the rectifier circuit to find the P and N terminals of the internal DC power supply of the inverter, adjust the multimeter to resistance X10, connect the red meter to P, and the black meter to R, S, and T respectively. There should be approximately Resistance value of tens of ohms, and basically balanced.

On the contrary, connect the black meter rod to the P terminal, and the red meter rod to R, S, and T in turn, with a resistance value close to infinity. Connect the red meter stick to the N terminal and repeat the above steps, you should get the same result.

If there are the following results, it can be determined that the circuit has been abnormal, A. The resistance of the three-phase imbalance, can indicate the rectifier bridge failure. B. When the red meter rod is connected to the P terminal, the resistance is infinite, and it can be concluded that the rectifier bridge is faulty or the starting resistance is faulty.

(2) To test the inverter circuit, connect the red meter rod to the P terminal, and the black meter rod to U, V, W respectively. There should be a resistance value of several tens of ohms, and the resistance value of each phase is basically the same, and the reverse phase should be gigantic. Connect the black meter rod to the N terminal and repeat the above steps to get the same result, otherwise it can be determined that the inverter module is faulty

2, Dynamic Test
After the static test result is normal, the dynamic test can be performed, that is, power on and test the machine.

The following points must be paid attention to before and after power-on: 1. Before power-on, confirm whether the input voltage is wrong. Connecting the 380V power supply to the 220V-class inverter will cause explosions (fried capacitors, varistors, modules, etc.) . 2. Check whether each broadcast port of the inverter is properly connected, and whether the connection is loose. Abnormal connection may sometimes cause the inverter to malfunction, and in severe cases, it may explode.

3. Check the fault display content after power-on, and preliminarily determine the fault and cause.

4. If no fault is displayed, first check whether the parameters are abnormal, and after resetting the parameters, start the inverter under no-load (no motor connection), and test the U, V, and W three-phase output voltage values.

If there is a lack of phase, three-phase unbalance, etc., the module or drive board is faulty. 5. When the output voltage is normal (no lack of phase, three-phase balance), load test. When testing, it is best to test at full load.

WEET produce and supply the most popular Flat and Square Bridge Rectifiers, contact us to get more solutions of procurement, test, development.
50A 1000V: KBPC5010 BR5010 GBJ5010
35A 1000V: GBPC3510 BR3510
10A 1000V: GBU1010 GBJ1010
6A 1000V: GBU610
more product support: https://weetcl.com/Products/
Skype, Email: info@weediode.com
Written by WEE Technology Company Limited

Read More

WEET Flat Bridge Rectifiers 1000V 6A 10A 50A GBJ1010 GBU1010 GBU610 GBJ5010 Single Phase Bridge

WEE Technology Company Limited
We are WEE, We Enhance Efficiency
Manufacturer of Diode Rectifier, Bridge Rectifier, Transistor


WEET Flat Bridge Rectifiers 1000V 6A 10A 50A GBJ1010 GBU1010 GBU610 GBJ5010 Single Phase Silicon Bridge


There are four types of bridge rectifier packages: square bridge, flat bridge, round bridge, and patch MINI bridge.

Square Bridge Rectifiers main packages: BR3, BR6, BR8, GBPC, KBPC, KBPC-W, GBPC-W, MT-35 (three-phase bridge).
Flat Bridge Rectifiers main packages: KBP, KBL, KBU, KBJ, GBU, GBJ, D3K.
Round Bridge Rectifiers main packages: WOB, WOM, RB-1.
SMD MINI Bridge Rectifiers main packages: BDS, MBS, MBF, ABS.

Connect the positive poles of two diode rectifiers (set this junction point as A) to form a series branch, and connect the negative poles of the other two diode rectifiers (set this junction point as B) to form another series branch, and then connect the above two branches in parallel (set the two branches and the connection points are respectively C and D), and the formed circuit is a square bridge rectifier. Also called a single-phase bridge rectifier circuit. AC power is input from C and D terminals, DC power Output from A (positive) and B (negative) terminals.

The Bridge Rectifier is made up of four rectifier silicon chips for bridge connection, and externally packaged with insulating plastic. The high-power bridge rectifier is encapsulated by zinc metal shell outside the insulating layer to enhance heat dissipation. There are many varieties of bridge rectifiers: flat, round, square, bench-shaped (in-line and patch), etc. The maximum rectified current ranges from 0.5A to 100A, and the maximum reverse peak voltage ranges from 50V to 1600V.

The Bridge Rectifier is generally used in full-wave rectifier circuits, and it is divided into full bridge and half bridge.

The half bridge is to seal the half of the two diode bridge rectifiers together. Two half bridges can form a bridge rectifier circuit, and a half bridge can also form a full wave rectifier circuit with a center tap of a transformer. The full bridge is composed of 4 diode rectifiers connected in the form of a bridge full-wave rectifier circuit and packaged as a whole.

The forward current of the full bridge has various specifications such as 0.5A, 1A, 1.5A, 2A, 2.5A, 3A, 5A, 10A, 20A, 35A, 50A, etc. The withstand voltage (the highest reverse voltage) is 25V, 50V, 100V, 200V, 300V, 400V, 500V, 600V, 800V, 1000V and other specifications.

1000V Single Phase Silicon Flat Bridge Rectifiers 6A GBU610, 10A GBJ1010 GBU1010, 50A GBJ5010 are used the most widely.
Consult us more information: https://weetcl.com/Single_Phase_Bridge_Rectifiers/   

more product support: https://weetcl.com/Products/ 
Skype, Email: info@weediode.com
Written by WEE Technology Company Limited

Read More

WEET Schottky Barrier Rectifiers Used In Communication Power Supplies, Inverters

WEE Technology Company Limited
We are WEE, We Enhance Efficiency
Manufacturer of Diode Rectifier, Bridge Rectifier, Transistor


Schottky diode, also known as Schottky barrier diode (SBD), is a low-power, ultra-high-speed semiconductor device. The most notable feature is that the reverse recovery time is extremely short (can be as small as a few nanoseconds), and the forward voltage drop is only about 0.4V. It is mostly used as high-frequency, low-voltage, high-current rectifier diodes, freewheeling diodes, protection diodes, and also useful as rectifier diodes and small signal detector diodes in circuits such as microwave communications. It is more common in communication power supplies, inverters, etc.

A typical application is in the switching circuit of a bipolar transistor BJT. By connecting a Schottky diode to the BJT to clamp, the transistor is actually close to the off state when it is on, thereby increasing the switching speed of the transistor. This method is a technique used in the TTL internal circuits of typical digital ICs such as 74LS, 74ALS, and 74AS.

The biggest feature of Schottky diodes is that the forward voltage drop VF is relatively small. At the same current, its forward voltage drop is much smaller. In addition, its recovery time is short. It also has some disadvantages: the withstand voltage is relatively low, and the leakage current is slightly larger. It must be fully considered when selecting.

WEET Schottky Barrier Rectifiers Used In Communication Power Supplies, Inverters
https://www.weetcl.com/Schottey_Barrier_Rectifiers/ 

Melf SM4001, SM4002, SM4003, SM4004, SM4005, SM4006, SM4007
SMB(DO-214AA) SS3150B, SS3200B
A-405 1N5817, 1N4818,1N5819
DO-41 1N5817, 1N5818, 1N5819
DO-41 SB120, SB130, SB140, SB150, SB160, SB180, SB1100
DO-41 SB220, SB230, SB240, SB250, SB260, SB220, SB2100
DO-41 SR22, SR23, SR24, SR25, SR26, SR28, SR210
DO-41 SR120, SR130, SR140, SR150, SR160, SR180, SR1100, SR1150, SR1200
DO-15 SR22, SR23, SR24, SR25, SR26, SR28, SR210
DO-15 SR120, SR130, SR140, SR150, SR160, SR180, SR1100, SR1150, SR1200
DO-15 SR220, SR230, SR240, SR250, SR260, SR280, SR2100
DO-15 SR320, SR330, SR340, SR350, SR360, SR380, SR3100
DO-15 SB220, SB230, SB240, SB250, SB260,SB280,SB2100,SB2150,SB2200
DO-27 1N5820, 1N5821, 1N5822
DO-27 SR3100L, SR5100L
DO-27 SR320, SR330, SR340, SR350, SR360, SR380, SR3100
DO-27 SR520, SR530, SR540, SR550, SR560, SR580, SR5100
DO-27 SB520L, SB530L, SB5240L, SB560L, SB580L, SB5100L
DO-27 SR502L, SR503L, SR504L, SR505L, SR506L, SR508L, SR510L
DO-27 SB3150, SB3200
DO-27 SR1045L, SR1060L, SR10100L, SR10150L, SR10200L
DO-27 SR802, SR803, SR804, SR805, SR806, SR808, SR810
DO-27 SR5150, SR5200
R-6 10SQ030, 10SQ035, 10SQ040, 10SQ045, 10SQ050, 10SQ060, 10SQ080, 10SQ100
R-6 15SQ040, 15SQ045, 15SQ050, 15SQ060, 15SQ080, 15SQ100
SOD-123FL K12, K13, K14, K15, K16, K18, K19, K110, K115, K120
SOD-123FL K22, K23, K24, K25, K26, K28, K29, K210 K215, K220
SMAF SS22F, SS23F, SS24F, SS25F, SS26F, SS28F, SS210F,SS2150F,SS2200F
SMAF SS32F, SS33F, SS34F, SS35F, SS36F, SS38F, SS310F, SS3150F, SS3200F
SMAF SS52F, SS53F, SS54F, SS55F, SS56F, SS58F, SS510F, SS5151F, SS5200F
SMAJ(DO-214AC) SS22, SS23, SS24, SS25, SS26, SS28, SS210
SMA(DO-214AC) SS22, SS23, SS24, SS25, SS26, SS28, SS210
SMA(DO-214AC) SS12, SS13, SS14, SS15, SS16, SS18, SS110
SMA(DO-214AC) SSL215, SSL220
SMA(DO-214AC) SS3150, SS3200
SMA(DO-214AC) SS52A, SS53A, SS54A, SS55A, SS56A, SS58A, SS59A, SS510A
SMA(DO-214AC) SS32, SS33, SS34, SS35, SS36, SS38, SS39, SS310
SMA(DO-214AC) SS22A, SS23A, SS24A, SS25A, SS26A, SS28A, SS29A, SS210A
SMA(DO-214AC) SS12, SS14, SS15, SS16, SS18, SS110, SS115, SS120
SMA(DO-214AC) SS215, SS220
SMA(DO-214AC) SS32, SS33, SS34, SS35, SS36, SS38, SS39,SS310
SMB(DO-214AA) SB540L, SB560L
SMB(DO-214AA) SK22, SK23, SK24, SK25, SK26, SK28, SK29, SK210
SMB(DO-214AA) SK32B, SK33B, SK34B, SK35B, SK36B, SK38B, SK39B, SK310B
SMB(DO-214AA) SK52, SK53, SK54, SK55, SK56, SK58, SK510, SK5150, SK5200
SMB(DO-214AA) SS22, SS23, SS24, SS25, SS26, SS28, SS29, SS210
SMB(DO-214AA) SS32B, SS33B, SS34B, SS35B, SS36B, SS38B, SS39B, SS310B
SMB(DO-214AA) SS34L, SS36L
SMB(DO-214AA) SS52, SS53, SS54, SS55, SS56, SS58, SS510, SS5150, SS5200
SMB(DO-214AA) SSL52, SSL53, SSL54, SSL55, SSL56
SMC(DO-214AB) SB540L, SB560L
SMC(DO-214AB) SS5150, SS5200
SMC(DO-214AB) SS32, SS33, SS34, SS35, SS36, SS38, SS39
SMC(DO-214AB) SS52, SS53, SS54, SS55, SS56, SS58, SS59, SS510
SMC(DO-214AB) SS32, SS33, SS34, SS35, SS36, SS38, SS310, SS3150, SS3200

more product support: https://weetcl.com/Products/ 
Skype, Email: info@weediode.com
Written by WEE Technology Company Limited

Read More

WEET Tells How to Quickly Grasp the Necessary Electronic Components for IoT Design

WEE Technology Company Limited
We are WEE, We Enhance Efficiency
Manufacturer of Diode Rectifier, Bridge Rectifier, Transistor

WEET Tells How to Quickly Grasp the Necessary Electronic Components for IoT Design


At the time when the Internet of Things (IoT) is booming, a variety of novel electronic product designs are sprouting, and equipment developers are making every effort to speed up product development and time to market in order to seize market share as soon as possible. With the increasingly fierce competition in the market, understanding how to quickly grasp the necessary electronic components for IoT design, as well as the important evaluation indicators and techniques for selecting relevant components, is of vital importance to promoting product launches.

Package:
The packaging of electronic components refers to how the parts are mounted on the circuit board. Many parts are either soldered on a printed circuit board (PCB), through a through-hole method, or using surface mount technology.

Basic Electronic Components:
The simplest components are discrete passive components. These parts have only a single function, such as providing resistance, capacitance, inductance, or adding voltage or current control. Most discrete components have only two to three pins.

Capacitor:
Capacitors store charge. Capacitors are mostly used for frequency filtering. Its unit is Faraday, F. Can use through hole or SMT package. The electrolytic capacitor has polarity and must be installed correctly, otherwise the capacitor may be damaged. When purchasing a capacitor, you must declare the polarity, type of dielectric (such as ceramic, plastic, paper, etc.), rated voltage and capacitance.

Diode Rectifier:
The diode rectifier can allow or block the flow of current in the circuit according to the voltage across it. Current is only passed when the anode voltage is higher than the cathode, and usually needs to be at least 0.7 volts higher. The diode is like a one-way valve, preventing the voltage from going in the wrong direction.

It is used for current conversion from AC to DC to prevent out-of-range input voltage. Zener diode is a special type of diode used as a voltage regulator. Schottky diodes have lower forward voltage drop (in the range of 0.15 to 0.45V) and faster turn-on time.

Transistor:
The transistor is a multifunctional circuit element. This three-pin device can be used as a voltage or current dependent switch, or as an amplifier or stabilizer depending on the circuit. There are two main technologies, bipolar junction (BJT) and field effect (FET). The pin terminals of these two types of transistors are different. BJT transistors are divided into two types according to the polarity of the components, NPN and PNP. FET transistors also have many classifications based on n-channel and p-channel.

more product support: https://weetcl.com/Products/
Skype, Email: info@weediode.com
Written by WEE Technology Company Limited

Read More

WEET Forward: China Intends to Fully Support the Semiconductor Industry

WEE Technology Company Limited
We are WEE, We Enhance Efficiency
Manufacturer of Diode Rectifier, Bridge Rectifier, Transistor

WEET Forward: China Intends to Fully Support the Semiconductor Industry


China is vigorously supporting the development of its own semiconductor industry, is planning to formulate a comprehensive set of new policies to develop its own semiconductor industry, and to give this task a high priority "just as it did when it made an atomic bomb.

Beijing is preparing to provide extensive support for "third-generation semiconductors" within five years to 2025. A series of measures have been added to the draft of China's 14th Five-Year Plan to strengthen research, education and financing in this industry. Compared with traditional silicon materials, the third-generation semiconductors are based on broadband semiconductor materials such as gallium nitride, silicon carbide, and zinc selenide, which are more suitable for manufacturing high-frequency and high-power devices with high temperature resistance, high voltage resistance, and high current resistance.

China is about to formulate its next five-year plan, which includes efforts to expand domestic consumption and manufacture key technology products domestically. China has pledged to invest approximately US$1.4 trillion in technologies ranging from wireless networks to artificial intelligence by 2025. Semiconductors are actually the basis for all aspects of China's technological ambitions.

According to China Customs statistics, my country's chip imports in 2019 were US$304 billion, a decrease of US$8 billion from the same period last year and a year-on-year decrease of 2.6%. Relevant data released by the State Council show that China's chip self-sufficiency rate in 2019 is only about 30%. Recently, the State Council issued the "Several Policies to Promote the High-quality Development of the Integrated Circuit Industry and Software Industry in the New Era", stressing that the integrated circuit industry and software industry are the core of the information industry and are the key force leading a new round of technological revolution and industrial transformation.

For the core industry of chips, which is "stuck-necked," it must have the initiative and can no longer be controlled by others. Third-generation semiconductors are often used in the 5G field. China remains a leader in 5G technology and has advanced development in fields such as communications, artificial intelligence, and cloud services. These high-tech applications will promote the development of third-generation semiconductors.

WEE Technology Surface Mount (SMD) and Through Hole (DIP) Diodes and Bridge Rectifiers Package Overview:
MBS,ABS,DBS,MBM,DB,WOB,GBP,GBL,GBU,KBJ2,GBJ4,KBPC25,KBPC-W,GBPC,GBPC-W,KBP,D3K,RS2,KBL,KBU,GBJ6,KBPC1,KBPC6,KBPC8,BR,BR-W,BR-L,SKBPC,DO-35,A-405,DO-41,R-1,DO-15,DO-27,R-6,DFM,DFS,DO-213AA,DO-213AB,ITO-220AB,ITO-220AC,MBM,MBS,SMC,SMA,SMAF,SMB,SOD-123FL,SOT-89,TO-92,TO-220AB,TO-220AC,SOD-123,SOD-323,SOD-523,SOT-23,SOT-323,SOT-523,LL-34

more product support: https://weetcl.com/Products/
Skype, Email: info@weediode.com
Written by WEE Technology Company Limited

Read More

WEET 2.0 AMPS GBP2005, GBP201,GBP202, GBP204, GBP206, GBP208, GBP210 Glass Passivated Bridge Rectifi

WEE Technology Company Limited

We are WEE, We Enhance Efficiency

Manufacturer of Diode Rectifier, Bridge Rectifier, Transistor


WEET 2.0 AMPS GBP2005, GBP201,GBP202, GBP204, GBP206, GBP208, GBP210 Glass Passivated Bridge Rectifiers


Manufacturer:WEE Technology Company Limited

Brand:WEET

Product Category:Bridge Rectifiers

Certification:RoHS,Reach,ISO 

Type:Single Phase Bridge

Product Type:Bridge Rectifiers 

Mounting Style:Through Hole

Package / Case:GBP

If - Forward Current:2 A

Ir - Reverse Current:10 uA

Peak Reverse Voltage:GBP2005-50V, GBP201-100V, GBP202-200V, GBP204-400V, GBP206-600V, GBP208-800V, GBP210-1000V

Vf - Forward Voltage:1.1 V

Max Surge Current:60 A

Minimum Operating Temperature:- 55 C

Maximum Operating Temperature:+ 150 C

Length:13.8mm-14.2mm

Width:10.2mm-10.6mm

Height:2.7-2.9mm

Packaging:Bulk

Weight:1.1g

Details: https://www.weetcl.com/Single_Phase_Bridge_Rectifiers/WEE_GBP_GBP2005_THRU_GBP210.html 

Specification: https://www.weetcl.com/pdf/WEET_GBP_GBP2005_THRU_GBP210.pdf 


Properly alternate and repalce GBP2005, GBP201,GBP202, GBP204, GBP206, GBP208, GBP210 of GeneSiC Semiconductor...


WEET is a professional supplier of semiconductor discrete device products. The products involve diode rectifiers, bridge rectifiers and small signal transistors etc., helping customers to enhance their competitive advantages at various levels such as research and development, procurement, production, logistics and warehousing, and to provide reliable quality, competitive prices, fast and punctual delivery and comprehensive professional services have become the best among semiconductor component suppliers.


Since its establishment, WEET has been relying on its own excellent platform, professional level and stable customer base. Our business involves LED lighting, new energy, power management, digital-to-analog conversion, operational amplification and other fields. Our customers cover green lighting, power security, and network In telecommunications, industrial control equipment, automotive electronics, consumer electronics and other industries, partners include trade counterparts, semiconductor companies, agents, electronic product manufacturers, scientific research institutions, etc.

more product support: https://weetcl.com/Products/

Skype, Email: info@weediode.com

Written by WEE Technology Company Limited

Read More

WEET 3.0 AMPS. GBP3005, GBP301,GBP302, GBP304, GBP306, GBP308, GBP310 Glass Passivated Bridge Rectif

WEE Technology Company Limited

We are WEE, We Enhance Efficiency

Manufacturer of Diode Rectifier, Bridge Rectifier, Transistor


WEET 3.0 AMPS. GBP3005, GBP301,GBP302, GBP304, GBP306, GBP308, GBP310 Glass Passivated Bridge Rectifiers


Manufacturer:WEE Technology Company Limited

Brand:WEET

Product Category:Bridge Rectifiers

Certification:RoHS,Reach,ISO 

Type:Single Phase Bridge

Product Type:Bridge Rectifiers 

Mounting Style:Through Hole

Package / Case:GBP

If - Forward Current:3 A

Ir - Reverse Current:10 uA

Peak Reverse Voltage:GBP3005-50V, GBP301-100V,GBP302-200V, GBP304-400V, GBP306-600V, GBP308-800V, GBP310-1000V

Vf - Forward Voltage:1.1 V

Max Surge Current:80 A

Minimum Operating Temperature:- 55 C

Maximum Operating Temperature:+ 150 C

Length:13.8mm-14.2mm

Width:10.2mm-10.6mm

Height:2.7-2.9mm

Packaging:Bulk

Weight:1.1g

Details: https://www.weetcl.com/Single_Phase_Bridge_Rectifiers/WEE_GBP_GBP3005_THRU_GBP310.html 

Specification: https://www.weetcl.com/pdf/WEET_GBP_GBP3005_THRU_GBP310.pdf 


Properly alternate and repalce GBP3005, GBP301,GBP302, GBP304, GBP306, GBP308, GBP310 of GeneSiC Semiconductor...


GBP310 is a flat bridge. GBP means its package. 3 means its rated current is 3A. 10 means its withstand voltage is 1000V. Its structure is packaged by four diode rectifiers.


With the development of the times and the advancement of science and technology, the original solution that used 4pcs 1N5408 to rectify has gradually been replaced by one bridge rectifier. Finally, GBP310 was successfully selected for its excellent performance, compact and ultra-thin body.


Nowadays, many factories that use the 1N5408 rectification scheme no longer use this scheme, and instead use the GBP310 bridge rectifier rectification scheme, which greatly reduces the processing procedures.


Good consistency, small dispersion, sustainable, efficient and stable work. It has the advantages of high impact resistance and good durability. WEE Technology technically improves the reliability and competitiveness of GBP310 products, and improves the stable performance of the rectifier circuit. Let customers enjoy price concessions while enjoying fine quality.

more product support: https://weetcl.com/Products/ 

Skype, Email: info@weediode.com 

Written by WEE Technology Company Limited

Read More

WEET 1.0 AMPS MB1F, MB2F, MB3F, MB4F, MB6F, MB8F, MB10F Glass Passivated Bridge Rectifiers

WEE Technology Company Limited
We are WEE, We Enhance Efficiency
Manufacturer of Diode Rectifier, Bridge Rectifier, Transistor

WEET 1.0 AMPS MB1F, MB2F, MB3F, MB4F, MB6F, MB8F, MB10F Glass Passivated Bridge Rectifiers

Manufacturer:WEE Technology Company Limited
Brand:WEET
Product Category:Bridge Rectifiers
Certification:RoHS,Reach,ISO
Type:Single Phase Bridge
Product Type:Bridge Rectifiers
Subcategory:Diodes & Rectifiers
Mounting Style:SMD/SMT
Package / Case:MBF
If - Forward Current:1 A
Ir - Reverse Current:5 uA
Peak Reverse Voltage:MB1F-50V, MB2F-100V, MB3F-200V, MB4F-400V, MB6F-600V, MB8F-800V, MB10F-1000V
Vf - Forward Voltage:1.1 V
Max Surge Current:30 A
Minimum Operating Temperature:- 55 C
Maximum Operating Temperature:+ 150 C
Length:4.5mm-4.9mm
Width:4.5mm-4.9mm
Height:max. 1.5mm
Packaging:TapeReel
Weight:0.1g
Details: https://www.weetcl.com/Single_Phase_Bridge_Rectifiers/WEE_MBF_MB1F_THRU_MB10F.html 
Specification: https://www.weetcl.com/pdf/WEET_MBF_MB1F_THRU_MB10F.pdf 

Properly alternate and repalce MB1F, MB2F, MB3F, MB4F, MB6F, MB8F, MB10F of Diodes Incorporated, Rectron...

MB10F is an ultra-thin SMD bridge rectifier, whose function is to convert alternating current into direct current, using the single-phase conductivity of the diode.

WEET MB10F's foot spacing is 2.2-2.6mm, the overall length is 4.5-4.9mm, the height is 1.5mm, the thickness is 0.56-0.84mm, the body width is 4.5-4.9mm, and the foot thickness is 0.15-0.35mm.

WEET MB10F is specially designed for smaller, thinner, and  lower energy consumption application circuits. It is an ideal choice for the design of trendy electronic products.

The soldering pins are the same as those of MB6S, which can be directly replaced without changing the PCB board, which is of great help to the development of the production industry of miniaturized high-current products, and is very suitable for portable applications that save circuit board space design.



more product support: https://weetcl.com/Products/ 
Skype, Email: info@weediode.com
Written by WEE Technology Company Limited

Read More

WEET 1.0 AMPS MB1S, MB2S, MB3S, MB4S, MB6S, MB8S, MB10S Glass Passivated Bridge Rectifiers MBS

WEE Technology Company Limited
We are WEE, We Enhance Efficiency
Manufacturer of Diode Rectifier, Bridge Rectifier, Transistor


WEET 1.0 AMPS MB1S, MB2S, MB3S, MB4S, MB6S, MB8S, MB10S Glass Passivated Bridge Rectifiers MBS

Manufacturer:WEE Technology Company Limited
Brand:WEET
Product Category:Bridge Rectifiers
Certification:RoHS,Reach,ISO
Type:Single Phase Bridge
Product Type:Bridge Rectifiers
Subcategory:Diodes & Rectifiers
Mounting Style:SMD/SMT
Package / Case:MBS
If - Forward Current:1 A
Ir - Reverse Current:5 uA
Peak Reverse Voltage:MB1S-50V, MB2S-100V, MB3S-200V, MB4S-400V, MB6S-600V, MB8S-800V, MB10S-1000V
Vf - Forward Voltage:1.1 V
Max Surge Current:30 A
Minimum Operating Temperature:- 55 C
Maximum Operating Temperature:+ 150 C
Length:4.5mm-4.9mm
Width:3.6-4.0mm
Height:2.3mm-2.7mm
Packaging:TapeReel
Weight:0.23g
Details: https://www.weetcl.com/Single_Phase_Bridge_Rectifiers/WEE_MBS_MB1S_THRU_MB10S.html 
Specification: https://www.weetcl.com/pdf/WEET_MBS_MB1S_THRU_MB10S.pdf 

Properly alternate and repalce below brands' bridge rectifiers:
(1) MB1S, MB2S, MB3S, MB4S, MB6S, MB8S, MB10S of ON Semiconductor / Fairchild, Diodes Incorporated, Micro Commercial Components (MCC), Comchip Technology, Vishay Semiconductors...
(2) RMB2S, RMB4S, RMB6S of Taiwan Semiconductor, Micro Commercial Components (MCC)...
(3) LMB2S, LMB4S, LMB6S, LMB8S, LMB10S of Micro Commercial Components (MCC)...
(4) LB2S, LB4S, LB6S, LB8S, LB10S of Micro Commercial Components (MCC)...

more product support: https://weetcl.com/Products/
Skype, Email: info@weediode.com
Written by WEE Technology Company Limited

Read More

WEET 1.0 AMPS DB101, DB102, DB103, DB104, DB105, DB106, DB107 Glass Passivated Bridge Rectifiers DB

WEE Technology Company Limited
We are WEE, We Enhance Efficiency
Manufacturer of Diode Rectifier, Bridge Rectifier, Transistor

WEET 1.0 AMPS DB101, DB102, DB103, DB104, DB105, DB106, DB107 Glass Passivated Bridge Rectifiers DB

Manufacturer:WEE Technology Company Limited
Brand:WEET
Product Category:Bridge Rectifiers
Certification:RoHS,Reach,ISO
Type:Single Phase Bridge
Product Type:Bridge Rectifiers
Subcategory:Diodes & Rectifiers
Mounting Style:Through Hole, Dip, Leaded
Package / Case:DB
If - Forward Current:1 A
Ir - Reverse Current:10 uA
Peak Reverse Voltage:DB101-50V, DB102-100V, DB103-200V, DB104-400V, DB105-600V, DB106-800V, DB107-1000V
Vf - Forward Voltage:1.1 V
Max Surge Current:50 A
Minimum Operating Temperature:- 55 C
Maximum Operating Temperature:+ 150 C
Length:8.10mm-8.51mm
Width:6.2-6.5mm
Height:2.4mm-2.9mm
Packaging:Tube
Weight:0.4g

Properly alternate and repalce below brands' bridge rectifiers:
(1) DB101, DB102, DB103, DB104, DB105, DB106, DB107 of MCC, Rectron, Taiwan Semiconductor, Comchip Technology, Comchip Technology, Diodes Incorporated...
(2) DB101G, DB102G, DB103G, DB104G, DB105G, DB106G, DB107G of Comchip Technology, GeneSiC Semiconductor...
(3) EDB101, EDB102, EDB103, EDB104, EDB105, EDB106 of Rectron...

Details: https://www.weetcl.com/Single_Phase_Bridge_Rectifiers/WEE_DB_DB101_THRU_DB107.html 
Specification: https://www.weetcl.com/pdf/WEET_DB_DB101_THRU_DB107.pdf 

Other DB packing Bridge Rectifiers:
DB151 DB152 DB153 DB154 DB155 DB156 DB157
1.5AMPS. DB151 THRU DB157 (DB151, DB152, DB153, DB154, DB155, DB156, DB157) Glass Passivated Bridge Rectifiers
https://www.weetcl.com/pdf/WEET_DB_DB151_THUR_DB157.pdf 
2.0 AMPS. DB201 THRU DB207(DB201, DB202, DB203, DB204, DB205, DB206, DB207) Glass Passivated Bridge Rectifiers
https://www.weetcl.com/pdf/WEET_DB_DB201_THRU_DB207.pdf 

WEET Bridge Rectifiers are widely used in below industries, feel free to consult any more information.

Industrial:
Motor Control,Smart Power Meter,Welder,Industrial Air Conditioning

Automotive:
Electric Vehicle Charging Station, DC Converter, Switching, Inverter, Control/Monitor

Computing:
Input Stage Rectification, Transient Protection, ESD Protection, DC/DC Power, Camera Motor Drive

Aerospace:
Cockpit Electronics, Engine Systems, Actuation Systems, Communications, Passenger Cabin Systems

Medical:
Hearing Aid, Glucometer, Electrocardiograph, Patient Monitor, Supervisory, Ultrasound Imaging

LED Lighting:
LED Street Lamp, Compact Fluorescent Lamp (CFL) , Rice cooker, Garden Lighting, LCD, Backlighting

Consumer:
SMPS, Uninterruptable Power Supply, ORing Diode Function, Application_Low Voltage Power

Power Supply:
SMPS, Uninterruptable Power Supply, ORing Diode Function, Application_Low Voltage Power

Alternative Energy:
Power Bank, Smartphone, Tablet, Wearable, Wireless Headset, Solar Panel, Solar Inverter

more product support: https://weetcl.com/Products/
Skype, Email: info@weediode.com
Written by WEE Technology Company Limited

Read More

WEET 2.0 AMPS DB201, DB202, DB203, DB204, DB205, DB206, DB207 Glass Passivated Bridge Rectifiers DB

WEE Technology Company Limited
We are WEE, We Enhance Efficiency
Manufacturer of Diode Rectifier, Bridge Rectifier, Transistor


WEET 2.0 AMPS DB201, DB202, DB203, DB204, DB205, DB206, DB207 Glass Passivated Bridge Rectifiers DB

Manufacturer:WEE Technology Company Limited
Brand:WEET
Product Category:Bridge Rectifiers
Certification:RoHS,Reach,ISO
Type:Single Phase Bridge
Product Type:Bridge Rectifiers
Subcategory:Diodes & Rectifiers
Mounting Style:Through Hole, Dip, Leaded
Package / Case:DB
If - Forward Current:2 A
Ir - Reverse Current:10 uA
Peak Reverse Voltage:DB201-50V, DB202-100V, DB203-200V, DB204-400V, DB205-600V, DB206-800V, DB207-1000V
Vf - Forward Voltage:1.1 V
Max Surge Current:60 A
Minimum Operating Temperature:- 55 C
Maximum Operating Temperature:+ 150 C
Length:7.8mm-8.5mm
Width:6.2-6.5mm
Height:3.15mm-3.40mm
Packaging:Bulk, Tube
Weight:0.38g

Properly alternate and repalce DB201, DB202, DB203, DB204, DB205, DB206, DB207 of MCC, Rectron, Taiwan Semiconductor, Comchip Technology, Comchip Technology, Diodes Incorporated...

Details: https://www.weetcl.com/Single_Phase_Bridge_Rectifiers/WEE_DB_DB201_THRU_DB207.html 
Specification: https://www.weetcl.com/pdf/WEET_DB_DB201_THRU_DB207.pdf 

Other DB packing Bridge Rectifiers:
DB101 DB102 DB103 DB104 DB105 DB105 DB107
DB151 DB152 DB153 DB154 DB155 DB156 DB157

more product support: https://weetcl.com/Products/ 
Skype, Email: info@weediode.com
Written by WEE Technology Company Limited

Read More

WEET 1.0 AMPS DB101S, DB102S, DB103S, DB104S, DB105S, DB106S, DB107S Glass Passivated Rectifiers

WEE Technology Company Limited
We are WEE, We Enhance Efficiency
Manufacturer of Diode Rectifier, Bridge Rectifier, Transistor

WEET 1.0 AMPS DB101S, DB102S, DB103S, DB104S, DB105S, DB106S, DB107S Glass Passivated Bridge Rectifiers DBS


Manufacturer:WEE Technology Company Limited
Brand:WEET
Product Category:Bridge Rectifiers
Certification:RoHS,Reach,ISO
Type:Single Phase Bridge
Product Type:Bridge Rectifiers
Subcategory:Diodes & Rectifiers
Mounting Style:SMD/SMT
Package / Case:DBS
If - Forward Current:1 A
Ir - Reverse Current:10 uA
Peak Reverse Voltage:DB101S-50V, DB102S-100V, DB103S-200V, DB104S-400V, DB105S-600V, DB106S-800V, DB107S-1000V
Vf - Forward Voltage:1.1 V
Max Surge Current:50 A
Minimum Operating Temperature:- 55 C
Maximum Operating Temperature:+ 150 C
Length:8.13mm-8.51mm
Width:6.2-6.5mm
Height:3.05mm-3.30mm
Packaging:TAPE REEL
Weight:0.4g

Properly alternate and repalce DB101S, DB102S, DB103S, DB104S, DB105S, DB106S, DB107S of Rectron, Taiwan Semiconductor, Comchip Technology, Comchip Technology, Diodes Incorporated...

Details: https://www.weetcl.com/Single_Phase_Bridge_Rectifiers/WEE_DBS_DB101S_THRU_DB107S.html 
Specification: https://www.weetcl.com/pdf/WEET_DBS_DB101S_THRU_DB107S.pdf 

Other DBS packing Bridge Rectifiers:
DB151S DB152S DB153S DB154S DB155S DB156S DB157S
DB201S DB202S DB203S DB204S DB205S DB206S DB207S

more product support: https://weetcl.com/Products/ 
Skype, Email: info@weediode.com
Written by WEE Technology Company Limited

Read More