WEE Technology Company Limited
We are WEE, We Enhance Efficiency
Manufacturer of Diode Rectifier, Bridge Rectifier, Transistor

WEET Square Bridge Rectifiers 50A 1000V BR5010 Silicon Bridge Through Hole BR50005 BR5001 BR5002 BR5004 BR5006 BR5008

Our company adheres to the principle of honesty, all the products sold are in our own inventory, brand new original, real shots, all descriptions are true descriptions, and there is no shoddy.

The model BR5010, weight 955g, application range is motor, the rectifier element is a single-phase bridge, the power characteristic is medium power, the frequency characteristic is low frequency, AC input voltage is 380V, DC output voltage is 1000V, and DC output current is 50A, the forward peak voltage is 1000V, the reverse repetitive peak voltage is 1000V, the reverse repetitive peak current is 150mA, the insulation voltage is 3V, and the operating junction temperature is 115 ℃, the efficiency is 99%.

BR50005 BR5001 BR5002 BR5004 BR5006 BR5008 BR5010 Application Honda, Huandai, Huizhong, Hummer, Infiniti, Jaguar, Jeep...

The same seire Square Bridge Rectifiers 35A Silicon Bridge Through Hole 50V BR35005, 100V BR3501, 200V BR3502, 400V BR3504, 600V BR3506, 800V BR3508, 1000V BR3510.

WEE Technology Company Limited is a marketing office established in Hong Kong since 2000. We are specialized in manufacturing diodes and bridge rectifiers, both in surface mount and through hole Type, which including Zener Diodes,Switching Diodes,Bridge Rectifiers,General Rectifier Diodes,Fast Recovery Rectifiers,High Efficient Rectifiers,Schottey Barrier Rectifiers,Transient Voltage Suppessors,Super Fast Recovery Rectifiers,Small Signal Transistors.

WEE Jiangsu factory was set up in 2001, which specializing in diodes and rectifiers products, mainly including SMAF, SMA-J, SMA, SMB, SMC, DO-15, DO-27, DO-41, A-1, R-6 package and so on. WEE Anhui factory is the expertise in bridge rectifiers since 1998. Bridge rectifiers current range from 0.5A to 50A, voltage range from 50V to 1000V, most common package are MINIDIP, DB,WOM,MBS, MBF, KBP, GBP, GBL, S25VB, TO-220, KBL, KBU, GBU, GBJ, KBPC, GBPC and so on.All of our products are meeting RoHS 2.0 and Reach standard.

Current Export Market: North America, South America, Western Europe, Eastern Europe, Eastern Asia, Southeast Asia, Mid East, Africa..

Number of Employees: 401 - 500 People

more product support: https://weetcl.com/Products/ 
Skype, Email: info@weediode.com
Written by WEE Technology Company Limited

WEE Technology Company Limited
We are WEE, We Enhance Efficiency
Manufacturer of Diode Rectifier, Bridge Rectifier, Transistor

WEET Square Silicon Bridge Rectifiers 35A 1000V BR3510 Single Phase Bridge Through Hole BR35005 BR3501 BR3502 BR3504 BR3506 BR3508

FEATURES:
Surge overload:240~500 amperes peak
Low forward voltage drop
Mounting position: Any
Electrically  isolated  base:2000 Volts
Solderable 0.25" FASTON terminals
Materials used carries U/L recognition

BR10/15/25/35/50A W -G SERIES"-G" : RoHS Device

REVERSE VOLTAGE-50 to 1000V
FORWARD CURRENT-10/15/25/35/50A

MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating at 25°C ambient temperature unless otherwise specified.
Resistive or inductive load 60HZ.
For capacitive load current by 20%

The same seire Square Bridge Rectifiers:

10A Silicon Bridge Through Hole 50V BR10005,  100V BR1001, 200V BR1002, 400V BR1004, 600V BR1006, 800V BR1008
15A Silicon Bridge Through Hole 50V BR15005,  100V BR1501, 200V BR1502, 400V BR1504, 600V BR1506, 800V BR1508
25A Silicon Bridge Through Hole 50V BR25005,  100V BR2501, 200V BR2502, 400V BR2504, 600V BR2506, 800V BR2508
50A Silicon Bridge Through Hole 50V BR50005,  100V BR5001, 200V BR5002, 400V BR5004, 600V BR5006, 800V BR5008

Contact us to get Pricing, Inventory, Delivery & Lifecycle Information.

more product support: https://weetcl.com/Products/ 
Skype, Email: info@weediode.com
Written by WEE Technology Company Limited

WEE Technology Company Limited
We are WEE, We Enhance Efficiency
Manufacturer of Diode Rectifier, Bridge Rectifier, Transistor

WEET is a high-tech enterprise specializing in R&D, production and sales of semiconductor discrete devices. The company has introduced a full set of foreign advanced equipments and scientific management system, and its product quality enjoys a good reputation in domestic and overseas markets. WEET has passed the ISO9001:2015 quality management system, and all products comply with environmental protection ROHS, REACH, and halogen-free standards.

WEET product models are complete: General Purpose Rectifiers, High Efficiency Rectifiers, Ultra-Fast Recovery Rectifiers, Fast Recovery Rectifiers, Single Phase Bridge Rectifiers, Transient Voltage Suppressors, Schottey Barrier Rectifiers, High Speed Switching Diodes, Silicon Planar Zener Diodes, Small Signal Transistors etc. Package forms are: SOD-123, SOD-323, SOD-523, SMAF, SMBF, SMA, SMB, SMC, SOT-23, SOT-323, SOT-523, TO-220AB, DO-41, DO-15, DO-27, R-6, MBS, MBF, ABS, ABF, DBS, KBP, GBP, KBU, GBJ, GBU, KBL etc.

Products are widely used in mobile phone chargers, switching power supplies, LED lighting drive power supplies, smart meters, smart water meters, smart appliances, smart sockets, instrumentation, small home appliance control panels, 5G consumer electronics, etc.

GBU1010 GBU bridge rectifier is a rectifier device composed of two or four diodes.

The bridge stack has three types of half bridge，full bridge, and three-phase bridge, and there are two types of positive half bridge and negative half bridge.
The full bridge consists of four diodes with four lead-out pins.

The connection point of the cathodes of the two diodes is the "positive" of the full-bridge DC output terminal, and the connection point of the anodes of the two diodes is the "cathode" of the full-bridge DC output.

The half bridge is composed of two diodes with three lead-out pins.
The pins on both sides of the positive half-bridge are the anodes of the two diodes, that is, the AC input terminal; the middle pins are the cathodes of the two diodes, that is, the "positive" of the DC output terminal.
The negative poles of the two diodes on the pins on both sides of the negative half bridge are the AC input terminals; the middle pin is the anode of the two diodes, that is, the "negative" of the DC output terminal.

A positive half bridge and a negative half bridge can form a full bridge.

Example: WEET Flat Bridge Rectifiers GBU 10A 1000V GBU1010 Single Phase Bridge Through Hole GBU10005 GBU1001 GBU1002 GBU1004 GBU1006 GBU1008

more product support: https://weetcl.com/Products/ 
Skype, Email: info@weediode.com
Written by WEE Technology Company Limited

WEE Technology Company Limited
We are WEE, We Enhance Efficiency
Manufacturer of Diode Rectifier, Bridge Rectifier, Transistor

WEET Tells How to Measure the Quality of the Bridge Rectifier

Take three-phase rectifier bridge as an example. With a digital meter, it is normal if there is a voltage drop of about 700mV during forward measurement. If the voltage drop is small, it will be broken down, and if the voltage drop is too large, it will be blown. No pressure drop is normal. Multimeters are also called multiplex meters, multimeters, three-meters, multi-meters, etc. They are indispensable measuring instruments in power electronics and other sectors. They generally measure voltage, current, and resistance as their main purpose.

The three-phase bridge rectifier is composed of 6 diodes in series and parallel, and each diode can be measured separately according to the method of measuring a single diode.

According to the display mode, multimeters are divided into pointer multimeters and digital multimeters. It is a multi-function, multi-range measuring instrument. Generally, a multimeter can measure DC current, DC voltage, AC current, AC voltage, resistance and audio level, etc. Some can also measure AC current, capacitance, inductance and semiconductor parameters (such as β), etc.

WEET Flat Bridge Rectifiers GBU 6A 1000V GBU610 Single Phase Bridge Through Hole GBU6005 GBU601 GBU602 GBU604 GBU606 GBU608

The bridge rectifier stack GBU6005-GBU610 is used in small current products: low-power switching power supplies, power adapters, LED light rectifiers, electric fans, televisions, indoor air conditioners, household appliances and other related electrical products. Our products are new, original and has good stability and reliability. Welcome to consult and sample for testing.

more product support: https://weetcl.com/Products/ 
Skype, Email: info@weediode.com
Written by WEE Technology Company Limited

WEE Technology Company Limited
We are WEE, We Enhance Efficiency
Manufacturer of Diode Rectifier, Bridge Rectifier, Transistor

Measurement method of Bridge Rectifier：

The measurement method of the rectifier bridge stack is to use a multimeter to measure.

Measurement method: when normal, the forward and reverse resistances of the two AC input terminals ("~") of the full bridge are both infinite; the forward resistance of the "+""-" input terminal is infinite, and the reverse resistance (connected with red pen) "+", black pen connected to "-" end) is about 20K. Assuming to check with a digital universal meter (diode) file, the red pen is connected to "-', the black test pen is connected to "+" is 0.8; two "~" are connected are about 0.4, the red pen is connected to "+", the black pen is connected to the other three pins It must be infinite, otherwise it is a damaged rectifier.

The rectifier full bridge is composed of four diodes with four lead-out pins: the connection point of the negative poles of the two diodes is the "positive" of the DC output end of the full bridge, and the connection point of the anodes of the two diodes is the "negative" of the DC output end of the full bridge. The half bridge is composed of two diodes with three lead-out pins.

The pins on both sides of the positive half-bridge are the anodes of the two diodes, that is, the AC input terminal; the middle pins are the cathodes of the two diodes, that is, the "positive" of the DC output terminal. The negative poles of the two diodes on the pins on both sides of the negative half bridge are the AC input terminals; the middle pin is the positive poles of the two diodes, that is, the "negative poles" of the DC output terminals.

1. The basic principle of the rectifier bridge stack: The rectifier bridge stack product is made of four rectifier silicon chips for bridge connection and externally packaged with insulating plastic. The high-power rectifier bridge is encapsulated with a zinc metal shell outside the insulating layer to enhance heat dissipation. There are many types of rectifier bridges: flat, round, square, bench-shaped (in-line and patch), etc. There are GPP and O/J structures.

The maximum rectified current ranges from 0.5A to 100A, and the maximum reverse peak voltage ranges from 50V to 1600V. The half bridge is to seal the half of the two diode bridge rectifiers together. Two half bridges can form a bridge rectifier circuit, and a half bridge can also form a full wave rectifier circuit with a center tap of the transformer.

The full bridge is composed of 4 rectifier diodes connected in the form of a bridge full-wave rectifier circuit and packaged as a whole. The forward current of the full bridge has various specifications such as 0.5A, 1A, 1.5A, 2A, 2.5A, 3A, 5A, 10A, 20A, 35A, 50A, etc. The withstand voltage (the highest reverse voltage) is 25V, 50V, 100V, 200V, 300V, 400V, 500V, 600V, 800V, 1000V and other specifications.

2. Package form There are four types of rectifier bridge packages: square bridge, flat bridge, round bridge, and patch MINI bridge. The main packages of square bridges are (BR3, BR6, BR8, GBPC, KBPC, KBPC-W, GBPC-W, MT-35 (three-phase bridge)); the main packages of flat bridges are (KBP, KBL, KBU, KBJ, GBU, GBJ, D3K); round bridges are mainly packaged (WOB, WOM, RB-1); SMD MINI bridges are mainly packaged (BDS, MBS, MBF, ABS).

The following is piture for Flat Bridge Rectifier GBJ 50A 1000V GBJ5010

more product support: https://weetcl.com/Products/ 
Skype, Email: info@weediode.com
Written by WEE Technology Company Limited